Reposting after was mistakenly removed by mods (since resolved - Thanks)submitted by xSeq22x to CryptoCurrency [link] [comments]
A frequent question I see being asked is how Cosmos, Polkadot and Avalanche compare? Whilst there are similarities there are also a lot of differences. This article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important.
For better formatting see https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b
CosmosCosmos is a heterogeneous network of many independent parallel blockchains, each powered by classical BFT consensus algorithms like Tendermint. Developers can easily build custom application specific blockchains, called Zones, through the Cosmos SDK framework. These Zones connect to Hubs, which are specifically designed to connect zones together.
The vision of Cosmos is to have thousands of Zones and Hubs that are Interoperable through the Inter-Blockchain Communication Protocol (IBC). Cosmos can also connect to other systems through peg zones, which are specifically designed zones that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. Cosmos does not use Sharding with each Zone and Hub being sovereign with their own validator set.
For a more in-depth look at Cosmos and provide more reference to points made in this article, please see my three part series — Part One, Part Two, Part Three
(There's a youtube video with a quick video overview of Cosmos on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
PolkadotPolkadot is a heterogeneous blockchain protocol that connects multiple specialised blockchains into one unified network. It achieves scalability through a sharding infrastructure with multiple blockchains running in parallel, called parachains, that connect to a central chain called the Relay Chain. Developers can easily build custom application specific parachains through the Substrate development framework.
The relay chain validates the state transition of connected parachains, providing shared state across the entire ecosystem. If the Relay Chain must revert for any reason, then all of the parachains would also revert. This is to ensure that the validity of the entire system can persist, and no individual part is corruptible. The shared state makes it so that the trust assumptions when using parachains are only those of the Relay Chain validator set, and no other. Interoperability is enabled between parachains through Cross-Chain Message Passing (XCMP) protocol and is also possible to connect to other systems through bridges, which are specifically designed parachains or parathreads that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. The hope is to have 100 parachains connect to the relay chain.
For a more in-depth look at Polkadot and provide more reference to points made in this article, please see my three part series — Part One, Part Two, Part Three
(There's a youtube video with a quick video overview of Polkadot on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
AvalancheAvalanche is a platform of platforms, ultimately consisting of thousands of subnets to form a heterogeneous interoperable network of many blockchains, that takes advantage of the revolutionary Avalanche Consensus protocols to provide a secure, globally distributed, interoperable and trustless framework offering unprecedented decentralisation whilst being able to comply with regulatory requirements.
Avalanche allows anyone to create their own tailor-made application specific blockchains, supporting multiple custom virtual machines such as EVM and WASM and written in popular languages like Go (with others coming in the future) rather than lightly used, poorly-understood languages like Solidity. This virtual machine can then be deployed on a custom blockchain network, called a subnet, which consist of a dynamic set of validators working together to achieve consensus on the state of a set of many blockchains where complex rulesets can be configured to meet regulatory compliance.
Avalanche was built with serving financial markets in mind. It has native support for easily creating and trading digital smart assets with complex custom rule sets that define how the asset is handled and traded to ensure regulatory compliance can be met. Interoperability is enabled between blockchains within a subnet as well as between subnets. Like Cosmos and Polkadot, Avalanche is also able to connect to other systems through bridges, through custom virtual machines made to interact with another ecosystem such as Ethereum and Bitcoin.
For a more in-depth look at Avalanche and provide more reference to points made in this article, please see here and here
(There's a youtube video with a quick video overview of Avalanche on the medium article - https://medium.com/ava-hub/comparison-between-avalanche-cosmos-and-polkadot-a2a98f46c03b)
Comparison between Cosmos, Polkadot and AvalancheA frequent question I see being asked is how Cosmos, Polkadot and Avalanche compare? Whilst there are similarities there are also a lot of differences. This article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important. For a more in-depth view I recommend reading the articles for each of the projects linked above and coming to your own conclusions. I want to stress that it’s not a case of one platform being the killer of all other platforms, far from it. There won’t be one platform to rule them all, and too often the tribalism has plagued this space. Blockchains are going to completely revolutionise most industries and have a profound effect on the world we know today. It’s still very early in this space with most adoption limited to speculation and trading mainly due to the limitations of Blockchain and current iteration of Ethereum, which all three of these platforms hope to address. For those who just want a quick summary see the image at the bottom of the article. With that said let’s have a look
CosmosEach Zone and Hub in Cosmos is capable of up to around 1000 transactions per second with bandwidth being the bottleneck in consensus. Cosmos aims to have thousands of Zones and Hubs all connected through IBC. There is no limit on the number of Zones / Hubs that can be created
PolkadotParachains in Polkadot are also capable of up to around 1500 transactions per second. A portion of the parachain slots on the Relay Chain will be designated as part of the parathread pool, the performance of a parachain is split between many parathreads offering lower performance and compete amongst themselves in a per-block auction to have their transactions included in the next relay chain block. The number of parachains is limited by the number of validators on the relay chain, they hope to be able to achieve 100 parachains.
AvalancheAvalanche is capable of around 4500 transactions per second per subnet, this is based on modest hardware requirements to ensure maximum decentralisation of just 2 CPU cores and 4 GB of Memory and with a validator size of over 2,000 nodes. Performance is CPU-bound and if higher performance is required then more specialised subnets can be created with higher minimum requirements to be able to achieve 10,000 tps+ in a subnet. Avalanche aims to have thousands of subnets (each with multiple virtual machines / blockchains) all interoperable with each other. There is no limit on the number of Subnets that can be created.
ResultsAll three platforms offer vastly superior performance to the likes of Bitcoin and Ethereum 1.0. Avalanche with its higher transactions per second, no limit on the number of subnets / blockchains that can be created and the consensus can scale to potentially millions of validators all participating in consensus scores ✅✅✅. Polkadot claims to offer more tps than cosmos, but is limited to the number of parachains (around 100) whereas with Cosmos there is no limit on the number of hubs / zones that can be created. Cosmos is limited to a fairly small validator size of around 200 before performance degrades whereas Polkadot hopes to be able to reach 1000 validators in the relay chain (albeit only a small number of validators are assigned to each parachain). Thus Cosmos and Polkadot scores ✅✅
CosmosTendermint consensus is limited to around 200 validators before performance starts to degrade. Whilst there is the Cosmos Hub it is one of many hubs in the network and there is no central hub or limit on the number of zones / hubs that can be created.
PolkadotPolkadot has 1000 validators in the relay chain and these are split up into a small number that validate each parachain (minimum of 14). The relay chain is a central point of failure as all parachains connect to it and the number of parachains is limited depending on the number of validators (they hope to achieve 100 parachains). Due to the limited number of parachain slots available, significant sums of DOT will need to be purchased to win an auction to lease the slot for up to 24 months at a time. Thus likely to lead to only those with enough funds to secure a parachain slot. Parathreads are however an alternative for those that require less and more varied performance for those that can’t secure a parachain slot.
AvalancheAvalanche consensus scan scale to tens of thousands of validators, even potentially millions of validators all participating in consensus through repeated sub-sampling. The more validators, the faster the network becomes as the load is split between them. There are modest hardware requirements so anyone can run a node and there is no limit on the number of subnets / virtual machines that can be created.
ResultsAvalanche offers unparalleled decentralisation using its revolutionary consensus protocols that can scale to millions of validators all participating in consensus at the same time. There is no limit to the number of subnets and virtual machines that can be created, and they can be created by anyone for a small fee, it scores ✅✅✅. Cosmos is limited to 200 validators but no limit on the number of zones / hubs that can be created, which anyone can create and scores ✅✅. Polkadot hopes to accommodate 1000 validators in the relay chain (albeit these are split amongst each of the parachains). The number of parachains is limited and maybe cost prohibitive for many and the relay chain is a ultimately a single point of failure. Whilst definitely not saying it’s centralised and it is more decentralised than many others, just in comparison between the three, it scores ✅
CosmosTendermint consensus used in Cosmos reaches finality within 6 seconds. Cosmos consists of many Zones and Hubs that connect to each other. Communication between 2 zones could pass through many hubs along the way, thus also can contribute to latency times depending on the path taken as explained in part two of the articles on Cosmos. It doesn’t need to wait for an extended period of time with risk of rollbacks.
PolkadotPolkadot provides a Hybrid consensus protocol consisting of Block producing protocol, BABE, and then a finality gadget called GRANDPA that works to agree on a chain, out of many possible forks, by following some simpler fork choice rule. Rather than voting on every block, instead it reaches agreements on chains. As soon as more than 2/3 of validators attest to a chain containing a certain block, all blocks leading up to that one are finalized at once.
If an invalid block is detected after it has been finalised then the relay chain would need to be reverted along with every parachain. This is particularly important when connecting to external blockchains as those don’t share the state of the relay chain and thus can’t be rolled back. The longer the time period, the more secure the network is, as there is more time for additional checks to be performed and reported but at the expense of finality. Finality is reached within 60 seconds between parachains but for external ecosystems like Ethereum their state obviously can’t be rolled back like a parachain and so finality will need to be much longer (60 minutes was suggested in the whitepaper) and discussed in more detail in part three
AvalancheAvalanche consensus achieves finality within 3 seconds, with most happening sub 1 second, immutable and completely irreversible. Any subnet can connect directly to another without having to go through multiple hops and any VM can talk to another VM within the same subnet as well as external subnets. It doesn’t need to wait for an extended period of time with risk of rollbacks.
ResultsWith regards to performance far too much emphasis is just put on tps as a metric, the other equally important metric, if not more important with regards to finance is latency. Throughput measures the amount of data at any given time that it can handle whereas latency is the amount of time it takes to perform an action. It’s pointless saying you can process more transactions per second than VISA when it takes 60 seconds for a transaction to complete. Low latency also greatly increases general usability and customer satisfaction, nowadays everyone expects card payments, online payments to happen instantly. Avalanche achieves the best results scoring ✅✅✅, Cosmos with comes in second with 6 second finality ✅✅ and Polkadot with 60 second finality (which may be 60 minutes for external blockchains) scores ✅
CosmosEvery Zone and Hub in Cosmos has their own validator set and different trust assumptions. Cosmos are researching a shared security model where a Hub can validate the state of connected zones for a fee but not released yet. Once available this will make shared security optional rather than mandatory.
PolkadotShared Security is mandatory with Polkadot which uses a Shared State infrastructure between the Relay Chain and all of the connected parachains. If the Relay Chain must revert for any reason, then all of the parachains would also revert. Every parachain makes the same trust assumptions, and as such the relay chain validates state transition and enables seamless interoperability between them. In return for this benefit, they have to purchase DOT and win an auction for one of the available parachain slots.
However, parachains can’t just rely on the relay chain for their security, they will also need to implement censorship resistance measures and utilise proof of work / proof of stake for each parachain as well as discussed in part three, thus parachains can’t just rely on the security of the relay chain, they need to ensure sybil resistance mechanisms using POW and POS are implemented on the parachain as well.
AvalancheA subnet in Avalanche consists of a dynamic set of validators working together to achieve consensus on the state of a set of many blockchains where complex rulesets can be configured to meet regulatory compliance. So unlike in Cosmos where each zone / hub has their own validators, A subnet can validate a single or many virtual machines / blockchains with a single validator set. Shared security is optional
ResultsShared security is mandatory in polkadot and a key design decision in its infrastructure. The relay chain validates the state transition of all connected parachains and thus scores ✅✅✅. Subnets in Avalanche can validate state of either a single or many virtual machines. Each subnet can have their own token and shares a validator set, where complex rulesets can be configured to meet regulatory compliance. It scores ✅ ✅. Every Zone and Hub in cosmos has their own validator set / token but research is underway to have the hub validate the state transition of connected zones, but as this is still early in the research phase scores ✅ for now.
CosmosThe Cosmos project started in 2016 with an ICO held in April 2017. There are currently around 50 projects building on the Cosmos SDK with a full list can be seen here and filtering for Cosmos SDK . Not all of the projects will necessarily connect using native cosmos sdk and IBC and some have forked parts of the Cosmos SDK and utilise the tendermint consensus such as Binance Chain but have said they will connect in the future.
PolkadotThe Polkadot project started in 2016 with an ICO held in October 2017. There are currently around 70 projects building on Substrate and a full list can be seen here and filtering for Substrate Based. Like with Cosmos not all projects built using substrate will necessarily connect to Polkadot and parachains or parathreads aren’t currently implemented in either the Live or Test network (Kusama) as of the time of this writing.
AvalancheAvalanche in comparison started much later with Ava Labs being founded in 2018. Avalanche held it’s ICO in July 2020. Due to lot shorter time it has been in development, the number of projects confirmed are smaller with around 14 projects currently building on Avalanche. Due to the customisability of the platform though, many virtual machines can be used within a subnet making the process incredibly easy to port projects over. As an example, it will launch with the Ethereum Virtual Machine which enables byte for byte compatibility and all the tooling like Metamask, Truffle etc. will work, so projects can easily move over to benefit from the performance, decentralisation and low gas fees offered. In the future Cosmos and Substrate virtual machines could be implemented on Avalanche.
ResultsWhilst it’s still early for all 3 projects (and the entire blockchain space as a whole), there is currently more projects confirmed to be building on Cosmos and Polkadot, mostly due to their longer time in development. Whilst Cosmos has fewer projects, zones are implemented compared to Polkadot which doesn’t currently have parachains. IBC to connect zones and hubs together is due to launch Q2 2021, thus both score ✅✅✅. Avalanche has been in development for a lot shorter time period, but is launching with an impressive feature set right from the start with ability to create subnets, VMs, assets, NFTs, permissioned and permissionless blockchains, cross chain atomic swaps within a subnet, smart contracts, bridge to Ethereum etc. Applications can easily port over from other platforms and use all the existing tooling such as Metamask / Truffle etc but benefit from the performance, decentralisation and low gas fees offered. Currently though just based on the number of projects in comparison it scores ✅.
CosmosCosmos enables permissioned and permissionless zones which can connect to each other with the ability to have full control over who validates the blockchain. For permissionless zones each zone / hub can have their own token and they are in control who validates.
PolkadotWith polkadot the state transition is performed by a small randomly selected assigned group of validators from the relay chain plus with the possibility that state is rolled back if an invalid transaction of any of the other parachains is found. This may pose a problem for enterprises that need complete control over who performs validation for regulatory reasons. In addition due to the limited number of parachain slots available Enterprises would have to acquire and lock up large amounts of a highly volatile asset (DOT) and have the possibility that they are outbid in future auctions and find they no longer can have their parachain validated and parathreads don’t provide the guaranteed performance requirements for the application to function.
AvalancheAvalanche enables permissioned and permissionless subnets and complex rulesets can be configured to meet regulatory compliance. For example a subnet can be created where its mandatory that all validators are from a certain legal jurisdiction, or they hold a specific license and regulated by the SEC etc. Subnets are also able to scale to tens of thousands of validators, and even potentially millions of nodes, all participating in consensus so every enterprise can run their own node rather than only a small amount. Enterprises don’t have to hold large amounts of a highly volatile asset, but instead pay a fee in AVAX for the creation of the subnets and blockchains which is burnt.
ResultsAvalanche provides the customisability to run private permissioned blockchains as well as permissionless where the enterprise is in control over who validates the blockchain, with the ability to use complex rulesets to meet regulatory compliance, thus scores ✅✅✅. Cosmos is also able to run permissioned and permissionless zones / hubs so enterprises have full control over who validates a blockchain and scores ✅✅. Polkadot requires locking up large amounts of a highly volatile asset with the possibility of being outbid by competitors and being unable to run the application if the guaranteed performance is required and having to migrate away. The relay chain validates the state transition and can roll back the parachain should an invalid block be detected on another parachain, thus scores ✅.
CosmosCosmos will connect Hubs and Zones together through its IBC protocol (due to release in Q1 2020). Connecting to blockchains outside of the Cosmos ecosystem would either require the connected blockchain to fork their code to implement IBC or more likely a custom “Peg Zone” will be created specific to work with a particular blockchain it’s trying to bridge to such as Ethereum etc. Each Zone and Hub has different trust levels and connectivity between 2 zones can have different trust depending on which path it takes (this is discussed more in this article). Finality time is low at 6 seconds, but depending on the number of hops, this can increase significantly.
PolkadotPolkadot’s shared state means each parachain that connects shares the same trust assumptions, of the relay chain validators and that if one blockchain needs to be reverted, all of them will need to be reverted. Interoperability is enabled between parachains through Cross-Chain Message Passing (XCMP) protocol and is also possible to connect to other systems through bridges, which are specifically designed parachains or parathreads that each are custom made to interact with another ecosystem such as Ethereum and Bitcoin. Finality time between parachains is around 60 seconds, but longer will be needed (initial figures of 60 minutes in the whitepaper) for connecting to external blockchains. Thus limiting the appeal of connecting two external ecosystems together through Polkadot. Polkadot is also limited in the number of Parachain slots available, thus limiting the amount of blockchains that can be bridged. Parathreads could be used for lower performance bridges, but the speed of future blockchains is only going to increase.
AvalancheA subnet can validate multiple virtual machines / blockchains and all blockchains within a subnet share the same trust assumptions / validator set, enabling cross chain interoperability. Interoperability is also possible between any other subnet, with the hope Avalanche will consist of thousands of subnets. Each subnet may have a different trust level, but as the primary network consists of all validators then this can be used as a source of trust if required. As Avalanche supports many virtual machines, bridges to other ecosystems are created by running the connected virtual machine. There will be an Ethereum bridge using the EVM shortly after mainnet. Finality time is much faster at sub 3 seconds (with most happening under 1 second) with no chance of rolling back so more appealing when connecting to external blockchains.
ResultsAll 3 systems are able to perform interoperability within their ecosystem and transfer assets as well as data, as well as use bridges to connect to external blockchains. Cosmos has different trust levels between its zones and hubs and can create issues depending on which path it takes and additional latency added. Polkadot provides the same trust assumptions for all connected parachains but has long finality and limited number of parachain slots available. Avalanche provides the same trust assumptions for all blockchains within a subnet, and different trust levels between subnets. However due to the primary network consisting of all validators it can be used for trust. Avalanche also has a much faster finality time with no limitation on the number of blockchains / subnets / bridges that can be created. Overall all three blockchains excel with interoperability within their ecosystem and each score ✅✅.
CosmosThe ATOM token is the native token for the Cosmos Hub. It is commonly mistaken by people that think it’s the token used throughout the cosmos ecosystem, whereas it’s just used for one of many hubs in Cosmos, each with their own token. Currently ATOM has little utility as IBC isn’t released and has no connections to other zones / hubs. Once IBC is released zones may prefer to connect to a different hub instead and so ATOM is not used. ATOM isn’t a fixed capped supply token and supply will continuously increase with a yearly inflation of around 10% depending on the % staked. The current market cap for ATOM as of the time of this writing is $1 Billion with 203 million circulating supply. Rewards can be earnt through staking to offset the dilution caused by inflation. Delegators can also get slashed and lose a portion of their ATOM should the validator misbehave.
PolkadotPolkadot’s native token is DOT and it’s used to secure the Relay Chain. Each parachain needs to acquire sufficient DOT to win an auction on an available parachain lease period of up to 24 months at a time. Parathreads have a fixed fee for registration that would realistically be much lower than the cost of acquiring a parachain slot and compete with other parathreads in a per-block auction to have their transactions included in the next relay chain block. DOT isn’t a fixed capped supply token and supply will continuously increase with a yearly inflation of around 10% depending on the % staked. The current market cap for DOT as of the time of this writing is $4.4 Billion with 852 million circulating supply. Delegators can also get slashed and lose their DOT (potentially 100% of their DOT for serious attacks) should the validator misbehave.
AvalancheAVAX is the native token for the primary network in Avalanche. Every validator of any subnet also has to validate the primary network and stake a minimum of 2000 AVAX. There is no limit to the number of validators like other consensus methods then this can cater for tens of thousands even potentially millions of validators. As every validator validates the primary network, this can be a source of trust for interoperability between subnets as well as connecting to other ecosystems, thus increasing amount of transaction fees of AVAX. There is no slashing in Avalanche, so there is no risk to lose your AVAX when selecting a validator, instead rewards earnt for staking can be slashed should the validator misbehave. Because Avalanche doesn’t have direct slashing, it is technically possible for someone to both stake AND deliver tokens for something like a flash loan, under the invariant that all tokens that are staked are returned, thus being able to make profit with staked tokens outside of staking itself.
There will also be a separate subnet for Athereum which is a ‘spoon,’ or friendly fork, of Ethereum, which benefits from the Avalanche consensus protocol and applications in the Ethereum ecosystem. It’s native token ATH will be airdropped to ETH holders as well as potentially AVAX holders as well. This can be done for other blockchains as well.
Transaction fees on the primary network for all 3 of the blockchains as well as subscription fees for creating a subnet and blockchain are paid in AVAX and are burnt, creating deflationary pressure. AVAX is a fixed capped supply of 720 million tokens, creating scarcity rather than an unlimited supply which continuously increase of tokens at a compounded rate each year like others. Initially there will be 360 tokens minted at Mainnet with vesting periods between 1 and 10 years, with tokens gradually unlocking each quarter. The Circulating supply is 24.5 million AVAX with tokens gradually released each quater. The current market cap of AVAX is around $100 million.
ResultsAvalanche’s AVAX with its fixed capped supply, deflationary pressure, very strong utility, potential to receive air drops and low market cap, means it scores ✅✅✅. Polkadot’s DOT also has very strong utility with the need for auctions to acquire parachain slots, but has no deflationary mechanisms, no fixed capped supply and already valued at $3.8 billion, therefore scores ✅✅. Cosmos’s ATOM token is only for the Cosmos Hub, of which there will be many hubs in the ecosystem and has very little utility currently. (this may improve once IBC is released and if Cosmos hub actually becomes the hub that people want to connect to and not something like Binance instead. There is no fixed capped supply and currently valued at $1.1 Billion, so scores ✅.
All three are excellent projects and have similarities as well as many differences. Just to reiterate this article is not intended to be an extensive in-depth list, but rather an overview based on some of the criteria that I feel are most important. For a more in-depth view I recommend reading the articles for each of the projects linked above and coming to your own conclusions, you may have different criteria which is important to you, and score them differently. There won’t be one platform to rule them all however, with some uses cases better suited to one platform over another, and it’s not a zero-sum game. Blockchain is going to completely revolutionize industries and the Internet itself. The more projects researching and delivering breakthrough technology the better, each learning from each other and pushing each other to reach that goal earlier. The current market is a tiny speck of what’s in store in terms of value and adoption and it’s going to be exciting to watch it unfold.
For more information see the articles below (each with additional sources at the bottom of their articles)
Avalanche, a Revolutionary Consensus Engine and Platform. A Game Changer for Blockchain
Avalanche Consensus, The Biggest Breakthrough since Nakamoto
Cosmos — An Early In-Depth Analysis — Part One
Cosmos — An Early In-Depth Analysis — Part Two
Cosmos Hub ATOM Token and the commonly misunderstood staking tokens — Part Three
Polkadot — An Early In-Depth Analysis — Part One — Overview and Benefits
Polkadot — An Early In-Depth Analysis — Part Two — How Consensus Works
Polkadot — An Early In-Depth Analysis — Part Three — Limitations and Issues
This is part one of three articles where i will discuss what i have learnt whilst looking into Cosmos. I will provide links throughout the article to provide reference to sections as well as a list of sources at the bottom of the article for you to look into specific areas in more detail if required. Hopefully it will be useful for those interested in learning more about the project.submitted by xSeq22x to cosmosnetwork [link] [comments]
Cosmos is still very early in development process with components such as IBC which connects two blockchains together currently in research / specification stage, as a result can change by the time its released.
What is Cosmos?Cosmos is a network and a framework for interoperability between blockchains. The zones are powered by Tendermint Core, which provides a high-performance, consistent, secure PBFT-like consensus engine, where strict fork-accountabilityguarantees hold over the behaviour of malicious actors. Cosmos is not a product but an ecosystem built on a set of modular, adaptable and interchangeable tools.
In Tendermint, consensus nodes go through a multi-round voting proposal process first before coming to consensus on the contents of a block. When 2/3 of those nodes decide on a block, then they run it through the state transition logic providing instant finality. In current proof of work consensus for Ethereum, the consensus process is inverted, where miners pick the transactions to include in a block, run state updates, then do “work” to try and mine the block.
Tendermint BFT can handle up to thousands of transactions per second (depending on the number of validators). However, this only takes into account the consensus part, the application layer is the limiting factor though. Ethermint (described below) has achieved up to 200 tps to give you an idea of the speed available per blockchain which is significantly more than current versions of Ethereum and Bitcoin etc.
The Tendermint consensus is used in a wide variety of projects, some of the most notable include Binance Chain, Hyperledger Burrow. It’s important to note though that just using Tendermint consensus doesn’t mean they can connect to other chains with the cosmos ecosystem, they would need to fork their code to implement IBC as a native protocol to allow interoperability through IBC.
see https://raw.githubusercontent.com/devcorn/hackatom/mastetminfo.pdf for high res
The Tendermint consensus algorithm follows a traditional approach which relies on all validators to communicate with one another to reach consensus. Because of the communication overhead, it does not scale to 1000s of validators like Bitcoin or Ethereum, which can have an unlimited number of validators. Tendermint works when there are 100s of validators. (Cosmos Hub currently has a maximum of 100 validators and the maximum tested so far with Tendermint is 180 validators)Therefore, one of the downsides of a blockchain built using Tendermint is that, unlike Bitcoin or Ethereum, it requires the validators to be known ahead of time and doesn’t allow for miners to come and go as they please.Besides this, it also requires the system to maintain some notion of time, which is known to be a complex problem in theory. Although in practice, Tendermint has proven this can be done reasonably well if you use the timestamp aggregates of each node.
In this regard, one could argue that Tendermint consensus protocol is “less decentralized” than Bitcoin because there are fewer validators, and they must be known ahead of time.
Tendermint’s protocol guarantees safety and liveness, assuming more than 2/3 of the validators’ voting power is not Byzantine (i.e., malicious). In other words, if less than 1/3 of the network voting power is Byzantine, the protocol can guarantee safety and liveness (i.e., validators will never commit conflicting blocks at the same height and the blockchain continues to make progress).https://www.preethikasireddy.com/posts/how-does-cosmos-work-part1To see the process of how Tendermint works please see this diagram as well as more info here
SovereigntyCosmos goal is to provide sovereignty through governance to developers by making it easy to build blockchains via the Cosmos SDK and provide interoperability between them, using Tendermint consensus. This is their main differentiator compared to competition like Polkadot and Ethereum 2.0. Ethereum 2.0 and Polkadot are taking a different approach by only using shared security, where there is a root chain which controls the security / prevents double spending for all connected blockchains.
In Hub governance all stakers vote, the validators vote is superseded if the delegator votes directly
Governance is where all stakers vote on proposals to determine what changes are implemented in the future for their own blockchain, stakers can either choose to delegate their vote to the validator or they can instead vote directly. Without sovereignty all DAPPs share the same underlying environment. If an application requires a new feature in the EVM it has to rely entirely on the governance of the Ethereum Platform to accept it for example. However, there are also tradeoffs to having sovereignty as each zone is going to need a way to incentivise others to validate / create blocks on the Zone by running Full Nodes. Whilst it may be easy to create a blockchain using the cosmos SDK and to mint a token, there are the legal costs / regulation associated with creating your own token. How are you going to distribute the tokens? How are you going to list them on exchanges? How are you going to incentivise others to use the token without being classed as a security? All of which have led to a significant reduction in the number of ICOs being done. With every zone needing their own validator set, there’s going to be a huge number of validators required each trying to persuade them to validate their zone with only a finite number of validators available.
Each Zone / App is essentially a mini DAO and not all are going to be comfortable about having their project progress been taken out of their hands and instead relying on the community to best decide on the future (unless they control 2/3 of the tokens). The Cosmos Hub has proved this can be successful, but others may be risk averse to having their application be a mini DAO. Should someone / competitor acquire 1/3 of the tokens of a zone then they could potentially prevent any further progress being made by rejecting all governance votes (this would be very costly to do on the Cosmos Hub due to its high amount staked, but for all the other less secure zones this potentially may be an issue).
Security for some zones will likely be a lot lower with every developer needing to validate their own blockchain and tokenise them with POS with no easy way to validate the setup of a validator to ensure its secure. Whilst the Cosmos hub is very secure with its current value staked, how secure zone’s will be with significantly less staked remains to be seen. Whilst providing soverignty was Cosmos’s main goal from the start, they are also looking at being able to provide shared security by having validators of a connected Hub also validate /create new blocks on the connected zone’s blockchain for them as well. They are still going to need some way to incentivise the validators to this. Another option is if the developers didn’t want to create a token, nor want sovereignty etc, then they could just build a DAPP on the EVM on a zone such as Ethermint.
As can be seen their are potential advantages and disadvantages to each method, but rather than forcing shared security like Ethereum and Polkadot, Cosmos is giving the developer the choice so will be interesting to see which they prefer to go for.
Layers of a blockchainFrom an architecture standpoint, each blockchain can be divided into three conceptual layers:
The Cosmos SDK is a generalized framework that simplifies the process of building secure blockchain applications on top of Tendermint BFT. The goal of the Cosmos SDK is to create an ecosystem of modules that allows developers to easily spin up application-specific blockchains without having to code each bit of functionality of their application from scratch. Anyone can create a module for the Cosmos SDK and using ready built modules in your blockchain is as simple as importing them into your application.
The Tendermint BFT engine is connected to the application by a socket protocol called the Application Blockchain Interface (ABCI). This protocol can be wrapped in any programming language, making it possible for developers to choose a language that fits their needs.
Hub and Spoke TopologyCosmos follows a hub and spoke topology as its not feasible to connect every zone together. If you were to connect every blockchain together the number of connections in the network would grow quadratically with the number of zones. So, if there are 100 zones in the network then that would equal 4950 connections.
Zones are regular heterogenous blockchains and Hubs are blockchains specifically designed to connect Zones together. When a Zone creates an IBC connection with a Hub, it can automatically access (i.e. send to and receive from) every other Zone that is connected to it. As a result, each Zone only needs to establish a limited number of connections with a restricted set of Hubs. Hubs also prevent double spending among Zones. This means that when a Zone receives a token from a Hub, it only needs to trust the origin Zone of this token and each of the Hubs in its path. Hubs do not verify or execute transactions committed on other zones, so it is the responsibility of users to send tokens to zones that they trust.
There will be many Hubs within Cosmos network the first Hub to launch was the Cosmos Hub whose native staking token is called ATOM. ATOM tokens are specific to just the Cosmos Hub which is one hub of many, each with their own token. Transaction fees for the Cosmos Hub will be payable in multiple tokens so not just ATOMs whereas other Hubs such as IRIS has made it so that all transaction fees are paid in IRIS for transactions on its hub.
As mentioned, the Cosmos Hub is one of many hubs in the network and currently has a staking ratio of around 70% with its token ATOM having a market cap of just over $800 million. IRISnet was the second Hub to launch which currently has around 28% bonded with its token IRIS which has a market cap of just under $17 million. The Third Hub about to be launched later this month has its token SENT which has a market cap of around $3.4 million. As you can see the security of these 3 hubs differ wildly and as more and more hubs and then zones are brought online there is going to need to be a lot of tokens / incentivisation for validators.
Standard Cosmos zones / hubs don’t have smart contract functionality and so to enable this, as the Application layer is abstracted from the consensus layer via ABCI API described earlier, it allows Cosmos to port the code over from other blockchains such as Ethereum and use it with the Tendermint Consensus to provide access to the Ethereum Virtual Machine. This is what is called Ethermint.
This allows developers to connect their zones to specialised zones such as Ethermint to build and run smart contracts based on Solidity, whilst benefiting from the faster performance of the tendermint Conensus over the existing POW implementation currently. Whereas a normal Go Ethereum process runs at ~12.5 transactions per second (TPS), Ethermint caps out at 200 TPS. This is a comparison against existing Ethereum speeds, whilst obviously Ethereum are working on their own scaling solutions with Ethereum 2.0 which will likely be ready around the same time. Existing tools / dapps used on ethereum should easily be able to be ported over to Ethermint by the developer if required.
In addition to vertical scaling (with the increase in tps by using Tendermint consensus), it can also have multiple parallel chains running the same application and operated by a common validator set. So if 1 Ethermint zone caps out at 200 TPS then 4 Ethermint zones running in parallel would theoretically cap out at 800 TPS for example.
There is a huge number of developers / apps currently built on Ethereum, should a developer choose to migrate their DAPP over to Ethermint they would lose native compatibility with those on Ethereum (except through Peg Zone), but would gain compatibility with those running on Ethermint and others in the cosmos ecosystem.
You can find out more about Ethermint here and here
IBCIBC stands for inter-blockchain communication protocol and is an end-to-end, connection-oriented, stateful protocol for reliable, ordered, authenticated communication between modules on separate distributed ledgers. Ledgers hosting IBC must provide a certain set of functions for consensus transcript verification and cryptographic commitment proof generation, and IBC packet relayers (off-chain processes) are expected to have access to network protocols and physical datalinks as required to read the state of one ledger and submit data to another.
In the IBC architecture, modules are not directly sending messages to each other over networking infrastructure, but rather creating messages to be sent which are then physically relayed via “Relayers”. “Relayers” run off-chain and continuously scan the state of each ledger via a light client connected to each of the 2 chains and can also execute transactions on another ledger when outgoing datagrams have been committed. For correct operation and progress in a connection between two ledgers, IBC requires only that at least one correct and live relayer process exists which can relay between the ledgers. Relays will need to be incentivised to perform this task (the method to which hasn’t been established as of this writing)
The relay process must have access to accounts on both chains with sufficient balance to pay for transaction fees. Relayers may employ application-level methods to recoup these fees, such by including a small payment to themselves in the packet data. More information on Relayers can be found here
A high-level overview of the process is that Zone 1 commits an outbound message on its blockchan about sending say 1 x Token A to Hub1 and puts 1 x Token A in escrow. Consensus is reached in Zone 1, and then it’s passed to the IBC module to create a packet which contains the reference to the committed block, source and destination channel/ connection and timeout details and is added to Zone 1’s outbound queue as proof.
All relayers (who run off-chain) are continuously monitoring the state of Zone 1 via the Zone 1 light client. A Relayer such as Relayer 1 is chosen and submits a proof to Hub1 that Zone 1.
Hub 1 then sends a receipt as proof that it has received the message from Zone 1, relayer1 sends it to Zone 1. Zone 1 then removes it from its outbound queue and sends proof via another receipt to Hub1. Hub1 verifies the proof and mints the token.
This video below explains the process in more detail as well as covers some of the other points i raise later in this article so worth a watch (time stamped from 22:24 to 32:25) and also here from 38:53 to 42:50
Whilst there is an option for UDP style transfer where a zone will send a message to a Hub and it doesn’t care whether it gets there or in any order etc, Token transfers are going to require the TCP style connections in IBC where there is a send, receipt and then another receipt as explained above. Each Send, receipt followed by another receipt is going to take at least 2 blocks and so using Cosmos Hub block times as an example with 6.88 second block times a transfer between one zone and hub could take a minimum of 41.28 seconds. You also then have to factor in the amount of other transactions going through those at that time and relevant gas price to see whether it is able to use 2 consecutive blocks or whether it may take more. This is also explained in this video “ILP Summit 2019 | Cosmos and Interledger | Sunny Aggarwal” (time stamped) from to 12:50 to 15:45
In Part Two we will look at potential issues with multi hop routing, token transfers across multiple routes and Peg Zones, whilst also looking at other interoperability solutions that would resolve some of these issues and compliment the cosmos ecosystem. Part Two can be found here
Im zweiten Teil der Nodes Serie, zeige ich dir mit einer Schritt für Schritt Anleitung, wie du ganz einfach selbst eine Bitcoin Full Node bauen kannst.. Nachdem wir uns im ersten Teil angeschaut haben, was eine Bitcoin Full Node ist, und warum man eine betreiben sollte geht es hier nun weiter. Mit der Open-Source-Software myNode und einem Minicomputer namens Raspberry Pi*, ist, das aufsetzten ... A full node on the Bitcoin network can be run locally on a physical computer or on a virtual server. To start, you need to download the Bitcoin Core client on bitcoin.org and download the entire blockchain. For a full node to work, an open TCP port 8333 is required. When using a software firewall, you must provide access to avoid blocking the port. If you decide to configure the node manually ... Running a Bitcoin node is imperative if you want to trust that your Bitcoin transactions are being correctly verified and processed. Unfortunately, the perception is that setting up a full node is difficult. In this article, you ... Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network. Special Cases . Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety ... A reliable connection for at least eight hours or more per day is required to run a well-synced node. Port TCP/8333 is the port generally used to connect with Bitcoin Cash. Hosting a full node using a local machine is just as easy to set up, but it’s good to make sure your computer won’t be bogged down. A computer with around 2GB of RAM ... Port TCP/8333 is the port generally used to connect with Bitcoin Cash. Hosting a full node using a local machine is just as easy to set up, but it’s good to make sure your computer won’t be ... BTC/USDT Perpetual Binance price chart in real-time. Stats on multiple timeframes, order book, news and trollbox. Coinalyze. Futures Data. Individual Charts; Global Charts; Technical Analysis. Bitcoin Ethereum Ripple Bitcoin Cash Chainlink Binance Coin Litecoin Cardano Bitcoin SV EOS Monero Tron Stellar Lumens Crypto.com Coin Tezos UNUS SED LEO NEO NEM Cosmos Iota VeChain Dash THETA ZCash ...
[index]          
If you are new to Crypto, my suggestion is that you start with buying ~$150 worth of Bitcoin, Ethereum, Litecoin @ Coinbase and get familiar with storing it, moving it around, etc. binance futures tutorial in hindi & strategy, बिनेंस फ्यूचर्स पर ट्रेडिंग कैसे करें? - Duration: 25:02. Cryptoverse 2,132 views Binance US Director of Business Development Rena Shah discusses the new updates on their end such as: - New website widget - OTC Trading Portal - Brave Browser partnership and integration ... Binance considered rolling back the Bitcoin chain in order to recover stolen funds. How would that have happened? How likely is it that such a recovery method would be executed in the future? Hey Krypto Fans,willkommen zur Bitcoin-Informant Show Nr. 572 Heute geht's um folgende Themen: Binance vor dem Kollaps, Thailand ICO Portal & Wachstum von Bitcoin schlecht für das Bankensystem ... https://ToneVays.com Events --- Bitcoin: https://unconfiscatable.com/ Finance/Trading/Investing https://thefinancialsummit.com/ How to Use Bitcoin Tech: http... Binance IEOs (Initial Exchange Offerings) are they really that good? Today Chico Crypto takes an objective look into the code of many of the projects launched off the Binance launchpad. Is the ... $10 Of Free Bitcoin, Coinbase Referral: https://goo.gl/qKZMmB ... Make A Full Time Income Day Trading On Binance - Duration: 13:08. CryptoJack 116,166 views. 13:08. What Should You Buy During This ... Vite ecosystem has a lot to offer and multiple streams for generating returns. In this video I give an overview of the coin and ViteX decentralised exchange and also talk about staking, full nodes ... Non-Farm Payroll Tomorrow - Live Trading - S&P 500, Bitcoin, Gold/Silver & US Dollar Conquer Trading & Investing 732 watching Live now Bitcoin's Lightning Network, Simply Explained!